series am1dc-z 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.e 1 of 3 north america only features: ? rohs compliant sip7 package ? ? high efficiency up to 79% ? ? i/o isolation 6000 vdc ? ? low coupling capacity ? models single output model input voltage (v) output voltage (v) output current max (ma) *maximum output ripple & noise (mv p-p) switching frequency (khz) max capacitive load (uf) efficiency (%) am1dc-0503sh60z 5 3.3 303 200 25 220 71 am1dc-0505sh60z 5 5 200 200 24 220 75 am1dc-0509sh60z 5 9 111 150 24 220 77 am1dc-0512sh60z 5 12 83 150 35 220 76 am1dc-0515sh60z 5 15 67 150 36 220 77 am1dc-1203sh60z 12 3.3 303 200 30 220 70 am1dc-1205sh60z 12 5 200 200 30 220 74 am1dc-1209sh60z 12 9 111 150 30 220 76 am1dc-1212sh60z 12 12 83 150 31 220 76 am1dc-1215sh60z 12 15 67 150 31 220 76 am1dc-2403sh60z 24 3.3 303 150 43 220 70 am1dc-2405sh60z 24 5 200 150 42 220 71 am1dc-2409sh60z 24 9 111 120 44 220 70 am1dc-2412sh60z 24 12 83 150 43 220 72 am1dc-2415sh60z 24 15 67 150 45 220 73 models dual output model input voltage (v) output voltage (v) output current max (ma) *maximum output ripple & noise (mv p-p) switching frequency (khz) max capacitive load (uf) efficiency (%) am1dc-0503dh60z 5 3.3 152 120 23 100 73 am1dc-0505dh60z 5 5 100 120 23 100 75 am1dc-0509dh60z 5 9 56 75 24 100 79 am1dc-0512dh60z 5 12 42 75 36 100 77 am1dc-0515dh60z 5 15 33 75 35 100 77 am1dc-1203dh60z 12 3.3 152 120 32 100 72 am1dc-1205dh60z 12 5 100 120 30 100 73 am1dc-1209dh60z 12 9 56 75 31 100 75 am1dc-1212dh60z 12 12 42 75 31 100 74 am1dc-1215dh60z 12 15 33 75 31 100 76 am1dc-2403dh60z 24 3.3 152 100 43 100 72 am1dc-2405dh60z 24 5 100 100 42 100 69 am1dc-2409dh60z 24 9 56 75 41 100 73 AM1DC-2412DH60Z 24 12 42 100 43 100 72 am1dc-2415dh60z 24 15 33 100 47 100 75 *output ripple and noise are measured without external connection of filtering capacitor s. for reducing these values please ref er to the recommended circuit below.
series am1dc-z 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.e 2 of 3 north america only input specifications parameters nominal typical maximum units voltage range 5 12 24 4.5-5.5 10.8-13.2 21.6-26.4 vdc filter capacitor turn on transient process time 5 vin 12 vin 24 vin 760 300 280 s start up time 5 vin 12 vin 24 vin 2.8 2.3 2.24 ms absolute ma ximum rating 5 vin 12 vin 24 vin 0-7 0-15 0-28 vdc peak input voltage time 100 ms quiescent current 5 vin 12 vin 24 vin 30-40 20 10-15 ma rise time 5 vin 12 vin 24 vin 180 200 180 s input reflected ripple current thru 12h inductor, 5hz to 20mhz 20 ma rms isolation specifications parameters conditions typical rated units tested i/o voltage (rated for 1 min) flash tested for 3sec. 6000 vdc rated working voltage 250 v rms resistance >1000 mohm capacitance 10 pf output specifications parameters conditions typical maximum units voltage accuracy 3 % voltage balance (dual output model) balanced load 1 % short circuit protection continuous short circuit restart auto recovery line voltage regulation for 1% change of v in 1.2 % load voltage regulation from 10 to 100% load 10 % temperature coefficient 0.03 %/ o c maximum capacitive load single output models dual output models 220 100 f general specifications parameters conditions typical maximum units switching frequency 100% load see models table khz clearance distance input to output 2.5 mm operating temperature full load without derating -40 to +70 o c storage temperature -40 to +125 o c maximum case temperature 100 o c cooling free air convection humidity 95 % rh case material non-conductive black plastic, epoxy encapsulated (ul94v-0 rated) soldering temperature 1.5mm from case for 10 sec. 260 o c weight 4.2 g dimensions (l x w x h) 0.77 x 0.39 x 0.47 inches 19.56 x 9.80 x 12.00 mm mtbf >2 390 000 hrs (mil-hdbk-217 f at +25 o c) note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.
series am1dc-z 1 watt | dc-dc converter www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r6.e 3 of 3 north america only safety specifications parameters standards designed to meet iec 60950-1: 2001 pin out specifications pin 6000 vdc single dual 1 + v input + v input 2 - v input - v input 5 - v output - v output 6 no pin common 7 + v output + v output dimensions derating recommended application circuit for reducing the output ripple and noises: recommended output capacitor to reduce the converter?s ripple an d noises for single output models is 4.7f to 100f and for dua l output models is 4.7f to 68 f connected to both outputs. li with value of 12h and ci with value 10f to 100f are reco mmended to be connected to the input of the converter for emi improvement. note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency cert ifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an am bient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control sys tems or other such applications which necessitate specific safety and regulatory standards ot her the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s st andard terms of sale available at www.aimtec.com. free air convection 70oc safe operating area -40 020 40 60 85 0 20 40 60 80 100 100 output power (% ) -20 80 ambient temperature o c 19.56 (0.77) 15.20 (0.60) 2.54 (0.10) 9.80 (0.39) printed face 0.50 (0.02) 0.50 (0.02) 0.25 (0.01) 2.40 (0.09) 9.80 (0.39) 12.50 (0.49) 12.00 (0.47) 3.50 (0.14) 0.50 (0.02)
|
